Significant Changes and
Developments

Tapaco Public Company Limited (“Company”) was founded on 3 April 2000 with registered capital of Baht 20 million with the objective to produce, assemble and distribute engineering plastic parts to be used in assembling electrical appliance, electronics equipment and car audio equipment both in the country and overseas market. The Company is granted BOI privileges.

2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
2008
2007
2006
2005
2004
2003
2002
2001
2000
2021
  • ได้ทำการเพิ่มเครื่องฉีดพลาสติกขนาด 680 ตัน จำนวน 2 เครื่อง เพื่อให้สามารถรองรับการผลิตชิ้นงานที่มีขนาดใหญ่ขึ้น
  • บริษัท ซีโฟร์ พร็อพเพอร์ตี้ส์ (ประเทศไทย) ได้ขายที่ดินออกไป 1 แปลง
2020
  • บริษัทได้ทำการลดทุน จากการซื้อหุ้นคืนเพื่อบริหารทางการเงิน จำนวน 7,559,000 หุ้น ทำให้ทุนจดทะเบียนชำระแล้วอยู่ที่ 401,863,901 บาท
  • บริษัทฯ ได้ออกใบสำคัญแสดงสิทธิเพื่อซื้อหุ้นสามัญของบริษัทฯ ครั้งที่ 4 (TAPAC-W4) จำนวน 205,931,725 หน่วย
2019
  • บริษัทย่อย ซีโฟร์ พร็อพเพอร์ตี้ จำกัด ได้เข้าถือครองที่ดินเพิ่มเติม 1 แปลง มูลค่าประมาณ 215 ล้านบาท เพื่อดำเนินธุรกิจอสังหาริมทรัพย์ในประเทศ
2018
  • บริษัทฯ ได้มีการย้ายกลุ่มอุตสาหกรรม จาก กลุ่มสินค้าอุตสาหกรรม ไปยังกลุ่ม อสังหาริมทรัพย์และก่อสร้าง
  • บริษัทฯ ได้มีการจัดตั้งบริษัทย่อย 3 แห่งได้แก่ ซีโฟร์ พร็อพเพอร์ตี้ 2, 3 สำหรับธุรกิจอสังหาริมทรัพย์ และบริษัท ซีโฟร์ คอร์ปอเรชั่น จำกัด เพื่อลงทุนในบริษัทอื่น
  • บริษัทฯ ได้รับการส่งเสริมการลงทุนเพิ่มเติมอีก 1 บัตรสำหรับการประกอบผลิตภัณฑ์สำหรับโรงงานในนิคมปิ่นทอง
  • บริษัทย่อย ซีโฟร์ โกลบอล จำกัด เริ่มมีรายได้จากการเปิดสาขาแรกในเดือนมีนาคม 2561
2017
  • บริษัทฯ ได้มีการเพิ่มทุนจดทะเบียนเป็น 540,073,131 บาท เพื่อรองรับการออก TAPAC-W3 และการปรับสิทธิ TAPAC-W2
  • บริษัทฯ ได้มีการเปิดบริษัทย่อย 1 แห่ง ได้แก่ ซีโฟร์ โกลบอล จำกัด โดยถือหุ้นในอัตราส่วนร้อยละ 100 มีทุนจดเบียน 50 ล้านบาทเพื่อดำเนินธุรกิจค้าปลีก ค้าส่งผลิตภัณฑ์เครื่องสำอาง
2016
  • ในปี 2559 มีการใช้สิทธิแปลง Tapac-W2 ทั้งสิ้น 42,283,962 หน่วย ทำให้มีทุนจดทะเบียนชำระแล้วทั้งสิ้น 200,175,251.- บาท
  • บริษัทฯ ได้มีการเพิ่มอัตราส่วนการถือหุ้นในบริษัท C4 Hus AB เป็น 75.25% ตั้งแต่วันที่ 1 มีนาคม 2559
  • บริษัทฯ ได้มีการเปิดบริษัทย่อย 2 แห่ง ได้แก่ บริษัท C4 Assets AB ประเทศสวีเดน โดยถือหุ้นในอัตราส่วนร้อยละ 99.82 และบริษัท C4 Properties (Thailand) Co., Ltd. เพื่อดำเนินธุรกิจอสังหาริมทรัพย์
2015
  • ได้มีการติดตั้งเครื่องจักรเพิ่มที่โรงงานกบินทร์บุรีเพิ่มเติมอีก 8 Unit ทำให้มีเครื่องจักรที่โรงงานกบินทร์บุรีรวมทั้งสิ้น 38 Unit
  • ในปี 2558 มีการใช้สิทธิแปลง Tapac-W2 ทั้งสิ้น 6,354,850 หน่วย ทำให้มีทุนจดทะเบียนชำระแล้วทั้งสิ้น 157,891,289.- บาท
  • บริษัทฯ ได้มีการเข้าไปลงทุนในธุรกิจอสังหาริมทรัพย์ โดยถือหุ้นในบริษัท C4 Hus AB ประเทศสวีเดน โดยถือหุ้นในอัตราส่วนร้อยละ 50.50
2014
  • ได้ทำการก่อสร้างโรงงานแห่งใหม่ที่เขตอุตสาหกรรมกบินทร์บุรีเสร็จสิ้น ติดตั้งเครื่องฉีด 30 Unit และเริ่มทำการผลิตในเดือนกรกฎาคม 2557
  • บริษัทฯ ได้มีการออก TAPAC-W2 อายุ 3 ปี จำนวน 75,755,674 หน่วย โดยมีอัตราการแปลงสิทธิที่ 1:1 และราคาแปลงสิทธิ 2.10 บาท และเพิ่มทุนจดทะเบียนเป็น 227,267,158 บาท เพื่อรองรับการใช้สิทธิดังกล่าว โดยในปี 2557 ได้มีการใช้สิทธิทั้งสิ้น 25,000 หน่วย
2013
  • ได้เริ่มก่อสร้างโรงงานแห่งใหม่ที่พื้นที่เขตอุตสาหกรรมกบินทร์บุรี กำหนดเสร็จสิ้นในเดือนเมษายน 2557
  • ได้มีการแปลงสิทธิ TAPAC-W1 ทั้งสิ้น 55,825,039 หน่วย ทำให้ทุนจดทะเบียนเพิ่มขึ้นเป็น 151,511,439 บาท
  • ได้รับการส่งเสริมการลงทุน สำหรับโรงงานแห่งใหม่ที่เขตอุตสาหกรรมกบินทร์บุรี สำหรับกำลังการผลิต 1,000 ตันต่อไป
2012
  • บริษัทฯ ได้มีการลงทุนในเครื่องฉีดพลาสติกเพื่อการเพิ่มกำลังการผลิตอีก 15 เครื่อง รวมเป็นเงินลงทุนทั้งสิ้น 61.56 ล้านบาท
  • ได้มีแปลงสิทธิ Tapac-W1 ทั้งสิ้น 3,460,000 หน่วย ทำให้ทุนจดทะเบียนเพิ่มขึ้นเป็น 95,686,400 บาท
  • บริษัทฯ ได้มีการทำสัญญาซื้อที่ดิน เขตอุตสาหกรรมกบินทร์บุรี เนื้อที่ 28 ไร่ เป็นเงิน 39 ล้านบาท เพื่อเป็นสำนักงานและโรงงานสาขาของบริษัท
2011
  • บริษัทฯ ได้มีการลงทุนในเครื่องฉีดพลาสติกเพื่อการเพิ่มกำลังการผลิตอีก 5 เครื่อง รวมถึงการปรับปรุงอาคารโรงงาน รวมเป็นเงินลงทุนทั้งสิ้น 69.2 ล้านบาท
  • ได้มีแปลงสิทธิ Tapac-W1 ทั้งสิ้น 226,400 หน่วย ทำให้ทุนจดทะเบียนเพิ่มขึ้นเป็น 92,226,400 บาท
2010
  • บริษัทฯ ได้มีการลงทุนในการสร้างโรงงานแห่งใหม่บนพื้นที่เดิมของบริษัทฯ และลงทุนในเครื่องฉีดพลาสติกเพิ่มเติมอีก 4 เครื่อง รวมเป็นเงินลงทุนทั้งสิ้น 85.727 ล้านบาท
  • บริษัทฯ ได้มีการออก Warrant อายุ 3 ปี จำนวน 45,999,985 หน่วย โดยมีอัตราการแปลงสิทธิที่ 1:1 และราคาแปลงสิทธิ 2.30 บาท
2009
  • บริษัทฯ ได้มีการลงทุนในเครื่องฉีดพลาสติกเพิ่มเติมอีก 4 เครื่อง เพื่อทดแทนเครื่องจักรเดิมของบริษัทที่เริ่มมีการเสื่อมสภาพลง เป็นเงินลงทุน 11.17 ล้านบาท
2008
  • บริษัทฯ ได้มีการลงทุนในเครื่องฉีดพลาสติกเพิ่มเติมอีก 4 เครื่อง เพื่อทดแทนเครื่องจักรเดิมของบริษัทที่เริ่มมีการเสื่อมสภาพลง เป็นเงินลงทุน 9.16 ล้านบาท
2007
  • The subsidiary invested Baht 9.46 million in additional equipment to manufacture high-precision to improve sales and gross margin.
  • The Company received additional BOI privileges (3rd BOI certificate) for an additional 1,100 tons of production per year.
  • The subsidiary received additional BOI privileges (2nd BOI certificate) for an additional 280 mold production per year.
2006
  • The Company increased production capacity from 800 tons/year to 1,000 tons/year.
  • The subsidiary TAPM bought land and building from the Company. As a result, the Company and the subsidiary terminate previous lease contract.
  • The Company received more orders for printing equipment from Canon, Oki, Metco.
2005
  • The Company increased production capacity from 600 tons/year to 800 tons/year.
  • The Company received order from new customers, such as Canon, Metco, etc.
  • The Company increase TAPM registered capital from Baht 25 million to Baht 45 million to accommodate more orders
2004
  • The Company is certified international standard ISO 14001 in January 2004.
  • The Company completed plant construction in March 2004 and start relocating old equipment and installing new equipment in the new plant. The machine installation was completed in September 2004. The Company lease old plant to TAPM to produce mold die for plastic parts.
  • The Company increase registered capital from Baht 60 million to Baht 92 million by:
    1. Increase registered capital by issuing 4,000,000 new common shares at Baht 5 par value, which valued a total of Baht 20 million for initial public offering (IPO). The Company got listed in MAI Stock Exchange.
    2. The Company paid 2,400,000 shares dividend with Baht 5 par value. The issue worth a total of Baht 12 million. The share dividend was given out to the existing shareholders at the ratio of 5 existing shares for a new share.
  • The Company was listed in the MAI Stock Exchange on 2 December 2004.
2003
  • TAPM started recognizing revenue in 28 February 2003.
  • TAPM received BOI privilege from the Board of Investment according to the BOI certificate no. 1219(2) /2546 on 5 March 2003.
  • The Company began construction of a new factor in September 2003.
2002
  • The Company bought 8 rai of land in Pin Thong Industrial Estate to construct a new plant.
  • The Company change its status to public company limited on 13 September 2002 and increase the Company’s registered capital to Baht 60 million, comprised of 12 million common shares, with par value of Baht 5 each. The Company’s registered capital is fully paid up.
  • The Company received BOI privilege according to BOI certificate no. 1670 (1) /2545 on 31 October 2002.
  • The Company founded a subsidiary, Tapaco Mold Company Limited (“TAPM”) on 11 December 2002 to manufacture mold die. The Company currently holds 94.8% of total paid-up capital of TAPM.
  • The Company is certified international standard ISO 9001:2000 in December 2002.
  • Japan Asia Investment Company Limited (“JAIC”), the fund that invest in high-growth potential SMEs, invested and hold equity stakes in the Company.
2001
  • The Company started selling engineering plastic parts for car audio equipment to YANO.
  • The Company started selling engineering plastic parts for printing machine for Mitsubishi (Singapore).
2000
  • The Company was founded as the company limited on 3 April 2000 under the name, Tapaco Company Limited with initial registered capital of Baht 20 million.
  • The Company is granted Board of Investment (BOI) privileges according to the BOI certificate no. 1398/2543 dated 20 July 2000.
  • During the first year of operation, fax machine components are the major revenue contributor of the Company. The Company manufacture and sell engineering plastic parts for fax machine to Sharp (Thailand) Company Limited, Sharp (Malaysia) and PNI.